Ask a Question
About usProjectsBlogProductionTechnologiesDiplomasReviewsDealersContacts
Download
Products Catalogue
Download
Questionnaire of the client
Technical support
We will help you

Feed Sifting and Measuring Equipment

The current balance with the counter is used for counting the feed consumption in the poultry house. The balance is installed into the break in the feed distributing line.

The working principle of the balance

The fed comes into the balance from above. Two scoops are used in the process: while the first scoop is filling with the feed, from the second one the feed goes to the lower storage bunker. The two scoops are joined in one body. During the process, the body moves cyclically to let the balance measure the feed. One batch weight is set with the help of the counterbalance in the range of 15-20 kg (depending on the volumetric density of the feed).

Impulse Counter IVELSY ® STIM

The impulse counter IVELSY ® STIM is a programmable electronic device with digital indicators. It is used for counting the quantity of the batches measured and running the process of feed distribution. An inductive or sealed-contact sensor is connected to the counter. The sensor is settled on the body of the balance and registers batches.

The controlling principle. In the counter, the number of batches is set for one feed-loading cycle from the outer launcher. When pushing the button START on the front panel of the counter (or activation of the external timer IVELSY ® Frontt-2R if it is installed for automatic load) the counter turns on the loading transporter and starts the countdown of the feed batches from the set quantity up to zero. Reaching zero, the counter turns off the loading transporter.

Counting principle. To count the measured batches there are absolute and relative counters in the device (like the speedometer of an automobile). The button START can reset the relative counter at the end of the working day for example. The absolute counter cannot be reset. The data of the absolute counter you can write down in the register.

Technical characteristics of the STIM-06

  • Supply voltage 220V 50Hz
  • Useful current, no more than (with turned-off end): 15mA
  • Weight no more than 0.3kg
  • Dimensions 134*174*86 mm
  • “Dry contact” ends – 2 pcs.
  • Symistor key end 240V 0.7A
  • End relay 240 V 6A
  • Programmable number of batches in one loading cycle (maximum value of the reverse counter) 999
  • Maximum value of the absolute counter 999999
  • Maximum value of he relative counter 999999

Description of the device

The indicator ON shows when the device is turned on at 220V.

The LED seven-segment six-digit indicator displays the data (the counter data, working modes);

The indicator OUT displays the condition of the key end;

The button ON is for turning on/ off the device;

The button START is for launching the counter or resetting it;

The buttons CHOOSE, MEAS are for programming and setting the counter, switching working modes;

The counter data and settings are kept when the supply voltage is off.



Name: *
Email: *
Telephone: *
Message: *


Other devices in this category:

The Control Panel for Feed Supply Equipment IVELSY  CPFE The control panel CPFE-300-ST-O1-V2-Sc1-CP is made for controlling the load and the distribution of feed.
The Control Panel for Chain Feeder IVELSY  CHF The chain feeder CHF is made for automation of the feed distribution process and poultry feeding at the floor keeping of the meat parent flock, at bringing up the rearing flocks with fixed feeding and meat broiler chickens
The Control Panel for Spiral Feeder IVELSY  SPF The chain feeder may be used in different types of the poultry houses and is made for running the feeding process of one spiral feed-distributing line.
The Programmable Timer IVELSY  Front-2R Is used for running two independent relay outputs according to the set programme and current time
Impulse Counter IVELSY  STIM It is used for counting the quantity of the batches measured and running the process of feed distribution.
Electric Shepherd IVELSY  ES-3 The device is used to prevent the poultry from sitting in the feeding or drinking places by means of the current impulse when the poultry touches the wire of the fence situated above the feeding-drinking system.
Check Feeding Trough Check feeding trough for feeding systems at floor keeping of all kinds of poultry
Feeding Trough Feeding Trough for feeding systems at floor keeping of all kinds of poultry
Feed Level Capacitive Sensors Non-contact capacitive sensors are used as elements of controlling systems for the technological processes in different branches of industry.

Workers

Denis A. Vasin
Delivery Driver

Development

The Control Panel Ivelsy® Svedios DS CP