Ask a Question
About usProjectsBlogProductionTechnologiesDiplomasReviewsDealersContacts
Download
Products Catalogue
Download
Questionnaire of the client
Technical support
We will help you

The IVELSY « Dimmers IDF

A digital dimmer IVELSY IDF-400-XXD (further dimmer) is made for controlling the brightness of the filament lamps.

There are 4 modifications of the dimmer produced (IDF-400-9.5D, IDF-400-18D, IDF-400-24D and IDF-400-30D) with the nominal capacity 9.5kW, 18kW, 24kW and 30kW respectively.

It is made for using in lighting systems. It can also be used in temperature controlling systems with the help of infrared reflecting lamps and control systems for commutator motors with alternating current.

- Sunset/ Sunrise function (smooth turning on and off the lamps);

- Several IDF dimmers may be combined into one system to raise the load capacity. Running is done from one dimmer by the analog output of 1-10 V.

- The illumination level, Sunset/Sunrise length, Day/ Night mode can be set in the manual mode with the help of handles on the front panel;

- The automatic mode RC1. Running the Day/Night cycles is set by the “dry contact” input from the outer IVELSY ® timer Front-2R.

- The automatic mode RC2. Running the illumination, Day/Night cycles, Sunset/Sunrise mode is set by the analog input 1-10 V from an external illumination controller IVELSY ® Rassvet.

Technical characteristics of the IDF

  • Supply voltage – 380 V 50Hz;
  • Output – power, type – thyristor;
  • Load control – phase-impulse;
  • Nominal load capacity:

- 3 channels * 3.16 kW (220V, 14A) = 9.5 kW

- 3 channels * 6 kW (220V, 28A) = 18 kW

- 3 channels * 8 kW (220V, 37A) = 24 kW

- 5 channels * 6 kW (220V, 46A) = 30 kW

  • Sunset/Sunrise length – 0-4 min.
  • Control output is analog, 1-10 V
  • Input RC1 is “dry contact”
  • Input RC2 is analog, 1-10 V
  • Weight not more than - 10 kg
  • Dimension 360*255*150 mm
  • Service life of the dimmer is not less than 5 years.

Description of the device

- The incoming switch ON is used for feeding the supply voltage to the dimmer (a LED lamp ON turns on when the phase A is on).

- the switcher MODE: Manual/Automat. In manual mode, the user runs turning on/ off the load with the tumbler SUNSET/SUNRISE. In automatic mode, an external timer runs turning on/off the load.

- the switcher CONTROL: Local/Remote. In the position “Local” the controlling signals of the power keys are produced by the built-in control unit of the dimmer (when the dimmer is used as a controlling one). In the position “Remote” the dimmer is used as a double, hat is the controlling signals of the power keys are produced by another (external) dimmer or illumination controller.

- the tumbler SUNSET/SUNRISE is made for turning on/off the load in manual mode.

- the handle LENGTH: Min/Max is made for setting the length of sunset/sunrise.

- the handle BRIGHTNESS: Min/Max is made for setting the maximum level of illumination (the lamp brightness at SUNRISE will rise up to the set level).



Name: *
Email: *
Telephone: *
Message: *


Other devices in this category:

The LED Adjustable Lamp IVELSY« Svedios« Alfa

An energy-saving LED line lamp for cage keeping of the poultry

The LED Adjustable Lamp IVELSY« Svedios« Sigma An energy-saving LED line lamp for cage keeping of the poultry
The LED Adjustable Lamp IVELSY« Svedios« Gamma (220V) The lamp is used in lighting systems for floor poultry keeping.
The LED Adjustable Lamp IVELSY« Svedios« Gamma (24V) The light fitting is used in lighting systems for cage poultry keeping.
The Adjustable Lantern IVELSY « FPL LA Are made for using as a part of the IVELSY« lighting system FPL (premium)
Coordination Panel SVEDIOS« is made for supplying the LED light fittings with the supply voltage of 24 V and controlling the illumination level
The Control Panel  IVELSY« Svedios« DS CP is made for controlling the lighting lines in the poultry house with the Svedios« system in manual and automatic modes
The illumination control panel IVELSY« FPL (ICP FPL) is made for controlling the lighting lines in the poultry house in manual and automatic modes
The IVELSY« Dimmers Series FML FD is made for adjusting the brightness of the compact fluorescent lamps (CFL) with the Sunset/Sunrise function (smooth turn-on and turn-off of the lamps)
Control Panel Ivelsy « Svedios « FPL-202 The control panel IVELSY « SVEDIOS FPL-202 is made for managing the illumination in manual mode or fed by an outer controller
Panels with the IVELSY « timer ST is made for controlling the Day/Night cycles in the Ivelsy « FBL lighting systems.
The IVELSY« Dimmers Series FBL FD is made for adjusting the brightness of the compact fluorescent lamps (CFL) in the Ivelsy « FBL lighting systems
The illumination controller IVELSY « Rassvet The illumination controller IVELSY « ôRassvetö is made for automatic running the illumination according to the technological programme
The Programmable Timer IVELSY « Front-2R Is used for running two independent relay outputs according to the set programme and current time

Workers

Irina V.Markina
Head of Production Department

Development

The Ivelsy® Dimmers Series FML FD